User manual

MITO User Manual
21
5. Basic operation
Switch on
Press the switch-on/off key to start the
mobile phone, then the screen will display
switch-on image. Then you can enter Settings
menu to set phone modes, including SIM1 &
SIM2 On, Only SIM1 On, Only SIM2 On and Flight.
The defaulted one is SIM1 & SIM2 On.
After insert SIM card, the mobile phone will
automatically check the SIM card availability, and
then it will be shown information as following on
the display by sequence:
1. “Input phone password”——If you have set
the password.
2. “Input PIN” —— If you set SIM card
password.
3. “No service”—Indicates fail to make register
and cannot make any calls.
4. “Emergency calls only”—indicates has
registered to other network and only can
make call to 112.
5. “Searching”—the mobile phone is searching
network until find appropriate network;
6. “Operator name”—Indicates network
successfully registered.