User manual

User Manual
37
Greeting text
Enable/disable the display of a greeting text (freely customizable) on startup.
Dedicated key
Create keyboard shortcuts for the most commonly used functions, assigning a function to each navigation key (up,
down, left, right).
UART settings
Enable the UART settings on one of the two SIM cards.
Miscellaneous settings
Set the LCD backlighting, controlling the Brightness and the Timer (5 sec. ~ 1 minute).
5. Network settings
For each SIM, the following options are available:
Network selection: for each SIM you can decide between an automatic selection and a manual one.
Preferences: for each SIM you can browse a list of networks where to register and assign a priority.
Note: disposition and availability of these options may vary according to the operator of each SIM.
6. Security settings
Security SIM (1 and 2)
SIM lock : you can set up the SIM card lock on your phone, so that it can't be used without a Personal
Identification Number (PIN). When the lock is enabled, you must enter the PIN each time you turn the phone
on. You also have the option to change the PIN (see below).
Change password: you can change here the PIN and PIN2 codes of each SIM.
Phone lock
You can set up the phone lock, digiting the requested password (the default password is “1122”). When the lock
is enabled, the phone will prompt you for your password before you can make or receive calls. Insert the default
password (or a personal one; see below how to change the password) to unlock, and confirm.
Auto keypad lock
You can activate here the Automatic keypad lock. The phone will automatically lock the keypad after a certain time
(5, 30, 60 seconds or 5 minutes). Press "Unlock" (SIM1 send key) and then "*" to unlock.