User manual

User Manual
15
Adjust receiver volume
How to Adjust the Receiver Volume
When speaking to someone, press the Navigation keys Up (+ volume) or Down (- volume) to adjust the receiver
volume.
Answer a call
Rispondere a una chiamata con varie opzioni
Quando c’è una chiamata in arrivo, sarete avvisati dalla suoneria, dalla vibrazione, dalla vibrazione insieme alla
suoneria o dalla vibrazione seguita dalla suoneria, in base alle impostazioni che avete scelto per il vostro telefono.
Per ricevere una chiamata, premete il tasto OK.
Per rifiutare una chiamata, premete il tasto FINE.
Se la CLI (Call Line Identity) è aperta, vedrete comparire il numero del chiamante sullo schermo. Se tale numero è
stato precedentemente salvato nella rubrica, verrà visualizzato sullo schermo anche il nome corrispondente al
numero.
Answering a Call with different options
When there is an incoming call, you will be alerted with ring, vibration, vibration and ring, or vibration then ring,
according to the settings of the mobile phone.
To receive a call, press OK key. If you prefer to use whatever key to answer, you can select: User Profiles > [
Selected Profile] > Customize > Answer mode > Any key.
To refuse a call, press the End key directly.
If the CLI (Call Line Identity) is opened, the phone number of the caller will be shown on the screen. If this
number has been saved in the phonebook, the name corresponding to this number will be displayed on the screen.
Pressing the SIM1 Send Key, you will access an Options screen, where you are allowed to put on hold the
current call, connect to another incoming call, record a call, enable the background sounds (to recreate the
realistic ambient sounds during a particular call, i.e. “platform” “airport”, “station”, “restaurant” and other user-
recordable sounds).
DTMF tones
Sending DTMF tones
With this option enabled, when calling up a voice mailbox or another automated phone system press the desired
number key and the “* “and “#” keys to send DTMF (Dual Tone Multi-Frequency) tones, in order to access options
or extension numbers.
Dial Hold
Place a Call on Hold
If you have applied for dial hold, in the call conversation process, choose “Call Center > Call Settings > SIM (1
or 2) Call Settings > Call Waiting” to have the following function menus:
Activate: to activate the function allowing to place a call on hold.
Deactivate: to deactivate the same function.
Query status: to query the current call status.
Note: some menu's elements need the network support; others may occur under special conditions. Please contact
the network operator for further details.