User manual

User Guide
28
Font size
You can change the size of the visualization font (default, small, large).
UART settings
Enable the UART settings on one of the two SIM cards.

Miscellaneous settings
LCD backlight: set the LCD backlighting, controlling the Brightness and the Timer (5 sec. ~ 1 minute).

T9 input
Toggle on/off the Smart input setting.
User profiles
Your mobile phone is provided with multiple profiles so that you can customize some settings in different cases for
different events. Firstly, choose a profile and then activate it. You can have such profiles as General, Meeting,
Outdoor, Indoor, Silent, Vibration, Headset and Bluetooth.
The features of each profile can be edited (Customize, OK key) to fit your needs as follows:
Tone settings: select the incoming call tone (SIM1 and SIM2), and the tones for turning on and off, for flip
opening/closing, for incoming messages (SIM1 and SIM2), and for keypad.
Volume: to set the volume of the abovesaid tones (SIM1 and SIM2).
Alert Type: you can choose the current ring mode among Ring only, Vibration only, Vibration and Ring, or
Vibration then Ring (separately for SIM1 and SIM2).
Ring Type: you can choose the current ring type among Single, Repeat and Ascending (SIM1 and SIM2).
Extra tone: enable/disable
Warning Tone, Error Tone, Camp on Tone, SMS Repeat Tone and Connect Tone.
Answer mode: if you prefer to use whatever key to answer a call, choose Any key; if you want to answer a
call by simply opening the flip, choose Cover answer.
After customizing the settings, select the profile and choose “OK” to activate ( in “Profile
Options”).
Note: after inserting headset plug into the matching jack or connecting a Bluetooth device, the mobile phone will
automatically change into Headset profile or Bluetooth profile. Unplug the headset or disconnect the device to
return to the previous profile. In idle state, you can press # key to switch to Silent profile and again to the
previous profile.
Network settings
For each SIM, the following options are available:

Network selection: for each SIM you can decide between an automatic selection and a manual one
.

Preferences: for each SIM you can browse a list of networks where to register and assign a priority.
Note:
disposition and availability of these options may vary according to the operator of
each SIM.