User manual

User Guide
22
 GPRS counter (separately for each SIM)
Last sent: you are able to view traffic sent in the last GPRS connection.
Last received: you are able to view traffic received in the last GPRS connection.
All sent: you are able to view global traffic sent.
All received: you are able to view global traffic received.
Reset counter: you can clear all your traffic data records.
Call settings
In dual-SIM mode, you can maintain separate Settings for SIM1 and SIM2.
Caller ID: you can choose ID as set by Network, Hide ID or Send ID

o
Set by network: while in conversation, you can send your Caller ID in the form preset by the system.
o
Hide ID: while in conversation, you will not send your Caller ID. If the system does not support such function,
call may fail.
o
Send ID: while in conversation, you can send your Caller ID to the system
Note: this function requires network support.
Call Waiting: you can freely choose to turn On or Off this function. The call hold cannot be active unless this
function is activated. This function requires network support.
Call Divert: this kind of function cannot be used unless you apply to the network operator for it. With this
function, you can divert calls meeting the following conditions to another number:
Condition
Description
Divert all voice calls
The network will divert all voice calls without conditions.
Divert if unreachable
When the network cannot find your mobile phone (switched-off or out of the service area),
it will divert the calls.
Divert if no answer
When the mobile phone does not answer the call, the network will automatically divert it.
Divert if busy
When you already are in a conversation, the network will divert the call.
Divert All Data Calls
The network will divert all data calls without conditions.
Cancel All Diverts
Cancel all divert conditions.
Call Barring: enable/disable block on outgoing calls (all, only international calls, international calls except to
home) and/or incoming calls (all or when in roaming). These options require a password (1122 as default),
freely modifiable by user.
Advanced settings:
o Auto redial: you can set this function as On or Off. After the first automatic redial fails, you can have at most
ten times to connect a phone number.
o Call time display: the phone screen can display the talking time of your current call.
o Call time reminder: the phone has time reminder: you can set a sound warning at any time you like or at
any time interval (between 30-60 seconds)..