User manual

Pagina
1 di 22
PhoneSuite User Manual
Preliminary Instructions: Phone Suite
Installation and First Use
The software PhoneSuite can be used directly from CD or after installation on the PC.
In any case, when using the application for the first time, it’s necessary to copy the USB driver on
the PC before launching PhoneSuite.
The driver will be automatically copied on the PC hard disk when selecting “Copy Driver on PC”
from the Main Menu, that will be visualized after inserting the PhoneSuite CD.
1. connect to the PC the USB cable that should have come with your mobile;
2. connect the USB cable to the mobile phone;
3. at this point, the phone screen will show the following three options: 1. mass storage - 2.
4. com port;
5. select the “com port”option;
6. the PC will install the 6218 USB Modem Driver on the PC;
7. launch PhoneSuite application; if the application is used directly from CD, click on “Start
PhoneSuite from CD” from the Main Menu; if you want to install the application on your
PC, click on “Install PhoneSuite on PC” from the Main Menu, then select the desired
installation path (or accept the default path) and start the application using the desktop
shortcuts or the Start Menu;
8. the lower side of the PhoneSuite screen will show now the notice “Connected!”;
9. now you can use the Phone Suite application: please see the following instructions for
further details.
NOTE: during the installation procedure, it is possible to get a messagge on the PC screen
warning that the software has not passed the testing to verify its compatibility with Microsoft
products. In any case this software has been tested for a long time with Microsoft systems and
it’s virus-free guaranteed.