User manual

Coffee User Manual

UART settings

Enable the UART settings on one of the two SIM cards.

Miscellaneous settings

Set the LCD backlighting, controlling the Brightness and the Timer (5 sec. ~ 1 minute) and OFN sensibility

(1~5) of the touchpad (Multifunction key).

5) Network settings

Network settings

Per ciascuna delle due SIM sono disponibili le opzioni:

Network selection: for each SIM you can decide between an automatic selection and a manual one.

Preferences: for each SIM you can browse a list of networks where to register and assign a priority.

Note: availability and position of this menu options may vary according to the network operator of each SIM.

6) Security settings

SIM1 and SIM2 security settings

SIM lock: you can set up the SIM card lock on your phone, so that it can't be used without a Personal Identification

Number (PIN). When the lock is enabled, you must enter the PIN each time you turn the phone on. You also have

the option to change the PIN.

Fixed dial: the FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict your outgoing

calls to a limited set of phone numbers; to enable this function, you must enter your PIN2 code. Use the Fixed dial

list to build a list of phone numbers to which restrict your outgoing calls.

Change password: you can change here the PIN e PIN2 of each SIM card.

Phone lock

You can set up the phone lock, digiting the requested password (the default password is ―1122‖). When the lock is

enabled, the phone will prompt you for your password before you can make or receive calls. Insert the default

password (or a personal one; see below how to change the password) to unlock, and confirm.

Auto keypad lock

You can activate here the Automatic keypad lock. The phone will automatically lock the keypad after a certain time (5,

30, 60 seconds or 5 minutes). Press the Multifunction key to unlock, then follow the on-screen directions.

Change Password

You can change here the password for the phone lock (the default password is ―1122‖) with another one easier to

remember and more secure. The new password has to be between 4-8 digits long.

Certificate manager

You can use Certificate Manager to see details about your certificates, modify them, delete them, or request new

ones.