User's Manual
4 5
HANDLE AND MAINTAIN A COMPACT DISC.
Follow the instructions below to handle and maintain your disc in
order that long time and trouble free performance can possibly be
obtained:
Ensure not to caress the rain bow side of the disc; handle the
disc by the edge.
Long time exposure to sunshine, high temperatures and
humidity will damage the disc. Keep the storage area clean.
Avoid sticking labels on both sides of a disc. Writing with
pointed articles on the disc should be strictly avoided.
Clean the disc wiping the centre and then working out to the
edge with a dry & soft cloth or a disc brush. Avoid any cleansing
lotion or chemical eradicator.
Store them in their cases when they are not to be used.
LOAD A DISC
1. Power on the unit.
2. Press the FUNCTION button repeatedly to switch to the CD mode.
3. Open the CD door.
4. Insert a disc with the label side facing upward (if the disc is upside down, the display will
indicate no disc on the screen).
5. Close the CD door by hand.
NOTE: Never touch the laser lens inside the CD compartment. If it ever gets dirty, clean it
with a CD cleaner disc.
REMOVE A DISC
1. Make sure the disc is not playing. If it is, press the STOP/M+ button.
2. Open the CD door.
3. Gently remove the disc.
4. Close the CD door by hand.
5. Replace the disc in its protective storage box.
PLAY A C D /MP3/WMA DISC
1. Power on the unit, press the FUNCTION button repeatedly to switch to the CD mode.
2. Load a CD/MP3/WMA disc into the CD compartment. Close the CD door, the disc will
begin to spin.
3. Adjust the volume level to the desired volume level by using the VOLUME UP/DN control
knob.
4. When the disc is successfully read, the total number of the disc shows on the display, the
playback starts automatically.
5. Press the PLAY/PAUSE/PAIR button once to halt music playback, the elapsed time of the
current track flashes to indicate the player in Pause mode; press the STOP/M+ button to
cease music playback, the LCD shows the total number of the tracks.
6. Press the MODE/PROG/MEM button repeatedly to switch among the play modes (repeat
1, repeat All, introduction and random play modes).
7. Press the POWER button to turn off the unit.
EXTERNAL MEMORY MEDIA OPERATION (USB, SD)
Prepare the player for external memory media operation.
1. Insert a USB data traveller into the USB port or insert a SD card into the SD card slot;
2. Press the FUNCTION button to switch the unit to USB or card modes. After the inserted
USB or card is detected, the playback will start from the first track of the first folder.
3. Press the MODE/PROG/MEM button repeatedly to switch among the play modes (repeat
1, repeat All, introduction and random play modes).
4. Press the PLAY/PAUSE/PAIR button to pause or resume the playback. Press the
STOP/M+ button to cease the playback.
SKIP TRACKS AND SEARCH FOR A SPECIFIC POINT TO PLAY (CD/MP3/WMA DISC
/USB/CARD)
1. Clockwise rotate the NEXT/PREVIOUS control knob shortly in music play to skip to the
next track.
2. Counter-clockwise rotate the NEXT/PREVIOUS control knob shortly in music play to go
back to the beginning of the current track. To skip to the previous track, counter-clockwise
rotate NEXT/PREVIOUS control knob twice shortly in music play to skip to the previous
track.
3. Press the 10+/M- button once in play to skip to 10 tracks ahead, twice to skip to 20 tracks
ahead. You can reach the last track of the disc using this button (unavailable at Bluetooth
mode).
4. Clockwise rotate and hold NEXT/PREVIOUS control knob in music play to search forward
at quick rate for a specific point to play.
5. Counter-clockwise rotate and hold NEXT/PREVIOUS control knob in music play to search
backward at quick rate for a specific point to play.
PROGRAMMED PLAY (CD/MP3/WMA DISC/USB/CARD)
1. At stop mode, press the MODE/PROG/MEM button once, icon "PROG" shows with a
program sequence indication "P01" first, then a track number flickers on the LCD with the
icon “PROG”;
2. Select the first track to be programmed using the NEXT/PREVIUS control knob, and
press the MODE/PROG/MEM button again to store and advance to the next
programming step (If there are several folders on the MP3/WMA disc or USB and SD card,
it is necessary to program folders first, then program tracks; the method of the folder
programming is the same as the above instructions of the tracks programming.).
3. Repeat the above steps to program more tracks. A maximum of 20 tracks for CD and 99
tracks for MP3/WMA/USB/card can be programmed in memory in a preferred order.
4. Press the PLAY/PAUSE/PAIR button to begin programmed play in the preferred order
after you are done with programming. The player stops automatically after all
programmed tracks are played.
5. You may press the STOP/M+ button to terminate programmed playback. In program stop
mode, press the PLAY/PAUSE/PAIR button to begin the programmed playback with the
programming order identical with the previous one done; press the STOP/M+ button
again to clear the programming.
BLUETOOTH OPERATING
This unit can receive stereo audio signal from a BLUETOOTH stereo audio source device.
1. Power on the unit, switch to BLUETOOTH mode by pressing the FUNCTION button.
HANDLE DISC ONLY AS SHOWN
CLEAN FROM CENTER TO EDGE
DO NOT STORE NEAR HEAT