User Guide

Step 2
Set the time you wish to schedule. Select Repeat to set
settings. Select Note, Notification to enable or disable this
feature. Select Switch to schedule on/off status.
Click on Save on the upper right-hand corner to save a
schedule.
Switch
60 %
9:41 AM
Power-on memory
Do Not Disturb: Enable the
do-not-disturb feature and turn off
your light before you sleep by using
the mobile app. In case of a power
outage, your light will go back to its
previous off-state after power is
restored. To power the light back on,
just turn the wall switch on and off
twice consecutively within five
seconds.
Once power is restored, one of the
three power-on states below can be
selected by the user:
Initial mode: Restores the color and
brightness to their default settings.
Restore memory: Reverts to the
color and brightness settings used
last.
Customized: The bulb lights up
based on the specific color and
brightness the user has selected.