Installation Instructions

1. Reset button: Press and hold this button for 8-10 seconds to

restore the router to its factory default settings. The router must be

powered on for this function to work.

2. WAN/LAN port: This RJ45 port is where you will connect the

DSL/cable modem or Ethernet line from your ISP. It can also be

used as a LAN if it is not the Main Node.

3. LAN port: Connect your local laptop or desktop computers in your

network to any of these RJ45 ethernet ports

4. DC-IN: Connect the supplied power adapter to this jack.

1. Install the Nexxt Wireless App on your mobile device by searching for

Nexxt Wireless in the App Store or by scanning the QR code.

2. Tap on the Nexxt Wireless app to start it.

• Bottom view

Setup

Available for iOS Nexxt Wireless

VEKTOR_XXXX

12345678

www.nexxtsolutions.com

Made in China / Fabricado en China

Vektor2400-AC

Whole Home Mesh WiFi System

Model/Modelo: NCM-2400-C

Power/ Alimentación: 9V 1A

MAC:

SN:

SSID:

Password: