User's Manual
Nexxt
Solutions
- NexxtGate150
Access
Point
3.
If setting
up
the device
in
an
outdoor location,
thread the tie wraps trough the grooves underneath
the brackets.
Then
attach the device firmly
to
the
pole.
The
connection will be similar
to
the figure
below,
once the
above
steps
have
been successfully
completed.
pole
4.
Herdwere installation
1.
Slide the bottom cover of the unit down
to
expose the
ports.
2.
In
order
to
integrate your new wireless access point
into your installation,
start
by
plugging
one
end
of
an
Ethernet cable
to
the
PoE
port
of the supplied injector
module,
and
the other
end
of the cable
to
the
LAN/
WAN/POE
port
on
the access point.
3.
Use a second Ethernet cable
to
make the connection
between the LAN
port
of the
PoE
module
and
your
computer.
4.
Replace the cover
by
sliding
it
up
it
until
it
clicks
in
place.
5. Power the device
by
plugging the included
AC
power
adapter
to
DC
jack
on
the
PoE
unit,
and
the other
end
into a standard wall outlet.
6