User's Manual

Nexxt Solutions - NexxtGate150 Access Point
1. Ground : Attach a copper wire here to establish a
good earth ground
and to provide the proper surge
and
lightning protection.
2.
SMA IQc This is a RP- SMA jack to connect an
optional external antenna
3. LAN : This is a 10/100Mbps LAN port
4. LAN/WAN/POE: This port provides Power over an
Ethernet connection through the injector module,
and
it works interchangeably as a WAN port in router
mode
end as a LAN port in AP mode.
5. Cable access hole cut-outs.
2.2 Injector overview
•LAN/WAN: 1 OOMbps Ethernet port.
• PDE: Power over Ethernet port.
• Reset: Press it for 8-10 seconds to
restore device to factory its default settings.
•Power:
DC input jack.
3