User's Manual

1. First determine the optimum location for the router. The best

place is usually at the center or your wireless network with the

antennas in the upright position.

2. Then, connect the modem to the WAN port of the router

using the supplied ethernet cable.

3. Connect your PC to the router if using a wired connection.

4. Insert one end of the supplied power adapter to the AC input

jack located on the rear panel of the router, before plugging the

other end to a standard electrical wall outlet.

PAGE 1
. First determine the optimum location for the router. The best place is usually at the center or your wireless network with the antennas in the upright position. 2. Then, connect the modem to the WAN port of the router using the supplied ethernet cable. 3. Connect your PC to the router if using a wired connection. 4. Insert one end of the supplied power adapter to the AC input jack located on the rear panel of the router, before plugging the other end to a standard electrical wall outlet.
PAGE 2
Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC rules.