User Guide

Step 2
Remove the original switch from the wall box
Identify the neutral wire by looking for one or more white
wires secured with a wire nut.
Note: If you can’t find the neutral wire, please open another
wall box. If you still can’t find it, contact a professional
electrician to help you.
Hardware installation
IMPORTANT
For safety, properly ground the switch
Always follow the code standards when installing wired
connections.
Step 1
Shut power off at the breaker
Find the breaker that controls the circuit for the junction
box where the smart light switch will be installed. Turn it to
the OFF position.
Place tape over the circuit breaker switch and verify that
power is off.
Note: you can use the circuit tester at this point to verify
that power is cut off.
ON
OFF
ON
OFF
ON
OFF
Common
Travel
Neutral
Travel
Ground