Datasheet

2
Technical Specifications
LED Indicator
POWER
1000Mbps
LINK/ACT
Color Status Description
Orange
- -
- -
- -
Orange
Orange
Orange
ON
The LED comes on when the switch is
properly connected
If this indicator is o, make sure the power
adapter is plugged correctly and that the power
button on the switch is turned on
The port is connected to a 1000Mbps
Ethernet station
The port is not connected to
a 1000Mbps Ethernet station
There is no connection at the
corresponding port
The switch is transmitting or receiving data
When a device is connected to a port of
the switch, the LINK/ACT lights up.
If only the LINK/ACT indicator is on but all
of the other indicators are o, it means that
the connection rate of this port is 10/100 Mbps
OFF
OFF
OFF
ON
ON
Blinking
www.nexxtsolutions.com
Compatible with:
IEEE802.3
IEEE802.3u
IEEE802.3ab
IEEE802.3x Flow control
Ethernet Standards
LED indicators provide information about the connection and Link/ACT status of the switch. They also facilitate
activity monitoring and troubleshooting the performance of the network.
Status indicators
3
4
1 2
The NetWise switches include the following main
components:
1. Reset button
2. Status indicators: Power / Ports
3. 10/100/100Mbps network ports
Front Panel
4. AC power socket
Back Panel