User's Guide

37
enter the PIN value of the adapter shown in Figure 6-6, click Connect.
Figure 6-8
4. When Figure 6-5 appears, the WPS configuration is complete.
6.2.2 Enter the PIN from your AP device
1. Open the WPS Utility and you will see Figure 6-3. Click Next to continue. Then Figure 6-9 will
appear. Select the third option and enter the PIN value which is generally labeled on the
bottom of the router. Click Next.
Figure 6-9
2. When Figure 6-5 appears, the WPS configuration is complete.
Note:
If you generate a new PIN code for your Router, please enter the new one instead.
ION-150 150Mbps Wireless N PCI-E Adapter