User's Guide

Chapter 6 WPS configuration

WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing

network quickly.

Note:

WPS function is not supported in Windows 7 OS.

If the wireless Router supports Wi-Fi Protected Setup (WPS), you can establish a wireless

connection between wireless adapter and router using either Push Button Configuration (PBC)

method or PIN method.

First, the WPS software should be installed. Insert the Resource CD into your CD-ROM drive, and

open the folder named ION-150 . Double-click WPS.exe in the proper folder to start the

installation, then the following screen for preparing setup will appear.

Figure 6-1

Then, please follow the hint of the Operation System to complete the WPS installation. After that,

WPS function can be enabled afterwards. We will explain here how to configure the WPS

(we have used the Wireless Router of our company as an example of how to configure the WPS).

6.1 PBC (Push Button Configuration) method

1. Firstly, press the WPS button directly on the front panel of the Router shown in Figure 6-2.

ION-150 150Mbps Wireless N PCI-E Adapter