User's Guide

31
Chapter 5 Configuration for Windows 7
(Nexxt) is not available for Windows 7. So after the Adapter's
driver has been installed, we have to use Windows WLAN Autoconfig to establish a connection.
Please follow the steps below.
1. Right-click the icon
at the bottom of your screen in your system tray and then you will
see the available wireless network list. Select the SSID of your Access Point, run a test,
for instance, to check the condition of thenetwork and click Connect.
Figure 5-1 Select A Network
ION-150 150Mbps Wireless N PCI-E Adapter
Nexxt Solutions Wireless Client Utility