User's Guide

28
Chapter 4 Configuration for Windows Vista
(Nexxt) is not available for Windows Vista. So after the
Adapter's driver has been installed, we have to use Windows WLAN Autoconfig to establish a
connection. Please follow the steps below.
1. Right-click the icon
at the bottom of your screen in your system tray and then select
“Connect to a network”.
Figure 4-1
2. This page will then display and you will see the available wireless network list. Select the
SSID
click Connect.
of your Access Point, run a test, for instance, to check the condition of the network and
Figure 4-2 Select A Network
ION-150 150Mbps Wireless N PCI-E Adapter
Nexxt Solutions Wireless Client Utility