User's Manual

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
57
Be sure to click the Save button to store your
settings on this page.
4.6.3 Wireless MAC Filtering
Go to “Wireless MAC Filtering” in the menu,
so that you can control the wireless access by
configuring the Wireless MAC Address Filtering
feature, as shown in Figure 4-20.
To filter wireless users by MAC Address, click
Enable. The default setting is Disable.
MAC Address - The wireless station’s MAC address
that you want to filter.
Status - It displays the current status of this entry,
either Enabled or Disabled.
Description - A short description of the wireless
station.
To Add a Wireless MAC Address filtering entry, click
the Add New button. The “Add or Modify Wireless
MAC Address Filtering entry” page will appear, as
shown in Figure 4-21 below:

Figure 4-20 Wireless MAC address Filtering
*
*
*