User's Manual

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
77
1.
2.
3.
4.
5.
6.
1.
2.
3.
Click the “Add New…” button (as in Figure 4-35).
Select the service you want to use from the
Common Service Port list. If the Common Service
Port list does not have the service that you want
to use, type the number of the service port or
service port range in the Service Port box.
Type the IP Address of the computer in the IP
Address box.
Select the protocol used for this application,
either TCP or UDP, or All.
Click on the check box to Enable the virtual server.
Click the Save button.
Click the Modify button next to in the entry you
want to change. If you want to erase this entry,
click on Delete.
Proceed with the changes you want to make.
Click the Save button.
Note:
If your computer or server has more than one type
of service available, please select a different service,
and enter the same IP Address for that computer or
server.
To modify or delete an existing entry:
To setup a virtual server entry:
Figure 4-35 Add or Modify a Virtual Server Entry