User's Manual

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
136
Figure A-8 Remote Management
2)To change the WEB management port number:
Log in to the router, go to the “Security” menu
located on the left of your browser, and select
the “Remote Management” submenu. On the
“Remote Management” page, type any port
number other than 80, such as 88, into the
“Web Management Port” field. Click Save and
reboot the Router.
2)
Note:
Log in to the Router, go to the “Forwarding” menu
located on the left of your browser, and select
the “Virtual Servers” submenu. On the “Virtual
Servers” page, click Add New…, then on the
“Add or Modify a Virtual Server” page, enter
“80” into the blank field next to the “Service
Port”, and your IP address next to the “IP
Address”, taking 192.168.0.188 as an example.
Remember to Enable and Save your settings at
the end.
If the above settings take effect, type
http://192.168.0.1:88 (the router’s LAN IP
address: Web Management Port) in the address
field of the Web browser in order to configure to
the router.
1)