User's Manual

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
133
MAC address will be copied into the “WAN MAC
Address” field. Or you may type the MAC Address
directly into the “WAN MAC Address” field. The
MAC Address format is XX-XX-XX-XX-XX-XX. Click
the “Save” button when you are done. This setting
will be effective only after the router has rebooted.
If you start Netmeeting as a host, you don’t need
to do anything with the router.
If you start as a response, you need to configure
the Virtual Server or DMZ Host and make sure
the H323 ALG is enabled.
How to configure the Virtual Server: Log in to
the router, go to the “Forwarding” menu located
on the left of your browser, and then select
“Virtual Servers” submenu. On the “Virtual
Servers” page, click Add New…. Once the “Add
or Modify a Virtual Server Entry” page opens,
enter “1720” in the “Service Port” blank field, and
your IP address in the corresponding field, using
192.168.0.169 as an example. Remember to
Enable and Save your settings at the end.
3. I want to use Netmeeting, what do I need
to do?
1)
2)
3)
Figure A-3 MAC Clone