User's Manual

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
132
2. How do I configure the router for Ethernet
users to access the Internet?
Note:
Login to the router. Go to the “Network” in the
menu located on the left of your browser, and
select “WAN” in the submenu. Once the WAN
page opens, select “Dynamic IP” as the WAN
Connection Type, and finish by clicking on the
“Save” button.
Some ISPs require that you register the MAC
Address of your adapter, which is connected to
your cable/DSL modem during installation. If your
ISP requires MAC register, login to the router
and click on the “Network” menu link on the left
of your browser, before selecting “MAC Clone” in
the submenu. On the “MAC Clone” page, if your
PC’s MAC address is a proper MAC address, click
the “Clone MAC Address” button and your PC’s
Sometimes the connection cannot be terminated
despite your setting of the ”Max Idle Time”
interval. This is due to some applications are con-
tinually linked to the internet in the background.
If you are a cable user, you must configure the
router following the above steps.
1)
2)
i.
ii.
Figure A-2 PPPoE Connection Mode