User's Manual

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
131
Appendix A: FAQ
1. How do I configure the Router to access
Internet by ADSL users?
First, configure the ADSL modem in the RFC1483
bridge mode.
Connect the Ethernet cable from your ADSL
modem to the WAN port on the router. The
telephone cord must be plugged into the “Line”
port of the ADSL modem.
Login to the router. Go to the “Network” in the
menu located on the left of your browser, and
select “WAN” in the submenu. Once the WAN
page opens, select “PPPoE” as the WAN
Connection Type. Type the “User Name” and
“Password” in the corresponding fields, and
finish by clicking on the “Connect” button.
If your ADSL access rates are “based on
connection time”, select “Connect on Demand” or
“Connect Manually” as your Internet connection
mode. Type an appropriate number for “Max Idle
Time” to avoid wasting paid time. Otherwise, you
can select “Auto-connecting” as your Internet
connection mode.
1)
2)
3)
4)
Figure A-1 PPPoE Connection Type