User's Manual

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
130
Current Statistics Status - Enable or Disable.
The default value is disabled. To activate it, click
the Enable button.
Packets Statistics Interval (5-60) - The default
value is 10. Select a value between 5 and 60
seconds from the pull-down list. This statistics
interval defines the time between each
transmission of data packets.
Sorted Rules - Select a rule from the pull-down
list to display the corresponding statistics.
Statistics Table:
Select the Auto-refresh checkbox to update data
automatically.
Click the Refresh button to update data
immediately.
Click Reset All to restore the values of all the
entries to zero.
Click Delete All to erase all entries in the table.
There would be 5 entries on each page.
Click Previous to return to the last page and Next
to go to the following page.
*
*
*
IP/MAC Address The IP/MAC Address displayed with statistics
The total amount of packets received and transmitted by the router
The total amount of bytes received and transmitted by the router
The total amount of packets received and transmitted in the
last Packets Statistic interval expressed in seconds.
The total amount of the ICMP packets transmitted to WAN
in the last Packets Statistic interval expressed in seconds
The total amount of the UDP packets transmitted to WAN
in the last Packets Statistic interval expressed in seconds
The total amount of the TCP SYN packets transmitted to WAN
in the last Packets Statistic interval expressed in seconds
The total amount of bytes received and transmitted in the
last Packets Statistic interval expressed in seconds.
Total
Packets
Bytes
Packets
Bytes
ICMP Tx
UDP Tx
TCP
SYN Tx
Current