User's Manual

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
125
Note:
The current configuration will be overwritten by the
uploaded configuration file. The upgrade process
lasts around 20 seconds, after which the router will
restart automatically. Keep the router on during the
entire upgrading process to prevent any potential
damage to the unit.
4.17.6 Reboot
Go to “System Tools Reboot”, and press the
Reboot button in order to reset the device, as
shown in the screen below.
Some settings of the Router will only take effect
after rebooting, which include:

Figure 4-80 Reboot the Router
LAN IP Address change (system will reboot
automatically).
DHCP Settings change.
Wireless configuration change.
Web Management Port change.
Upgrade the firmware of the Router (system will
reboot automatically).
Restore the Router’s settings to factory defaults
(system will reboot automatically).
Update the configuration with the file (system will
reboot automatically).
s
s
s
s
s
s
s