User's Manual

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
123
you want to use. However, when experiencing
problems caused by the router rather than the
configuration, you can try to upgrade the
firmware.
When you upgrade the router’s firmware, you may
lose its current configuration. Therefore, before
upgrading the firmware, please write down your
customized parameters to avoid losing important
settings.
Do not turn off power or press the reset button
while the firmware is being upgraded; doing so
might cause serious damage to the router.
The router will reboot after the upgrading has
been finished.
4.17.4 Factory Defaults
Go to “System Tools Factory Defaults” in the
menu, in order to restore the router configuration
to its factory default values, as seen on the following
screen.
Click the Restore button to reset all settings to their
factory default values.
2)
3)
4)

Figure 4-78 Restore Factory Default