User's Manual

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
121
IP Address/Domain Name - Type the destination IP
address (such as 202.108.22.5) or Domain name
of the PC whose connection you wish to diagnose.
Pings Count - Specifies the number of Echo
Request messages sent. The default is 4.
Ping Packet Size - Specifies the number of data
bytes to be sent. 64 is the default value.
Ping Timeout - Sets the maximum time that the
application will wait for a reply, in milliseconds.
When time exceeds the timeout limit, the session
will expire. 800 is the default value.
Traceroute Max TTL - Sets the maximum number
of hops (max TTL to be reached) in the path to
search for the target (destination). The default
is 20.
Click Start to check the connectivity of the Internet.
The Diagnostic Results page displays the outcome
of the diagnosis.
If the results you obtained are similar to the values
that appear in the screen below, it means that the
connectivity to the Internet is fine.
Note:
Only one user can use this tool at a time. “Number
of Pings”, “Ping Size” and “Ping Timeout” are Ping
parameters. “Tracert Hops” is a Traceroute
parameter.
*
*
*
*
*
Figure 4-76 Diagnostic Results