User's Manual

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
102
Figure 4-54 Target Settings
Target Description - The target name, which is
unique, is displayed in this field.
Information - The target can be an IP address,
port, or domain name.
Modify - Use this link to edit or delete an existing
entry.
If you select IP Address, the screen shown is
figure 4-55 will be displayed.
1) In the Target Description field, create a
unique description for the target (e.g. Target_1).
2) In the IP Address field, enter the
corresponding address for the target.
3) Select a common service from the Common
Service Port from the drop-down list, so that
the Target Port will be automatically filled out. If
the Common Service Port drop-down list does
not have the service you want, specify the Target
Port manually.
4) In the Protocol field, select TCP, UDP, ICMP
or ALL.
If you select Domain Name, the screen shown in
figure 4-56 will be displayed.
1) In the Target Description field, create a
unique name for the target (e.g. Target_1).
To add a new entry, please follow the steps below.
1. Click the Add New button.
2. In the Mode field, select IP Address or Domain
Name.
*
*
*
s
s