User's Manual

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
100
If you select an IP Address, the screen shown in
figure 4-52 will be opened.
1) In the Host Description field, create a unique
description for the host (e.g. Host_1).
2) In the LAN IP Address field, enter the
IP address.
If you select the MAC Address, the screen
shown in figure 4-53 will be opened.
1) In the Host Description field, create a unique
description for the host (e.g. Host_1).
2) In the MAC Address field, enter the
corresponding address.
s
s
Figure 4-52 Add or Modify a Host Entry
Host Description - The description of the host,
which is unique, is displayed here.
Information - The data about the host is displayed
in this field. It can be IP or MAC.
Modify - Use this link edit or delete an existing
entry.
Click the Add New button.
In the Mode field, select IP Address or MAC
Address.
Click the Save button to complete your settings.
Click the Delete All button to erase all the entries in
the table.
Click the Next button to go to the following page, or
click the Previous button to return to the last page.
*
*
*
1.
2.
3.
To add a new entry, please follow the steps below.