User's Manual

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
99
Click the Add New button to insert a new rule as
follows:
Then you will go back to the Access Control Rule
Management page where the list below will be
displayed.
4.12.1.1.1. Host
Go to menu “Access Control Host”, in order to
visualize and set a Host list in the screen, as shown
in figure 4-51 below. The host list is necessary for
the Access Control Rule.
5.
In the Rule Name field, create a name for the
rule. Note that this name should be unique, for
example Rule_1.
In the Host field, select Host_1.
In the Target field, select Target_1.
In the Schedule field, select Schedule_1.
In the Action field, select Allow.
In the Status field, select Enable.
Click Save to complete your settings.
s
s
s
s
s
s
s

Figure 4-51 Host Settings