User's Manual

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
98
Click “Access Control Host” on the left to open
the Host Settings page. Add a new entry identi-
fied as Host_1, using 00-11-22-33-44-AA as the
MAC Address.
Click “Access Control Target” on the left to
enter the Target Settings page. Add a new identi-
fied as Target_1, using www.google.com as the
Domain Name.
Click “Access Control Schedule” on the left to
open the Schedule Settings page. Add a new
entry identified as Schedule_1. The days are Sat
and Sun, Start Time is 1800 and Stop Time is
2000.
Click “Access Control Rule” on the left to
return to the Access Control Rule Management
page. Select “Enable Internet Access Control”
and choose “Deny the packets not specified by
any access control policy to pass through the
Router”.
For example: If you wish to allow the host with
MAC address 00-11-22-33-44-AA to access
www.google.com only from 18:00 to 20:00 on
Saturdays and Sundays, and forbid other hosts in
the LAN from accessing the Internet, you should
follow the steps as described below:
1.
2.
3.
4.
Figure 4-50 Add or Modify Internet Access Control Entry



