User's Manual

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
89
Figure 4-43 Local Management
By default, the radio button “All the PCs on the
LAN are allowed to access the Router’s Web-
Based Utility” is checked. If you want to allow PCs
with specific MAC Addresses to access the Setup
page of the Router’s Web-Based Utility locally from
inside the network, check the radio button “Only the
PCs listed can browse the built-in web pages to
perform Administrator tasks”, and then enter each
MAC Address in a separate field. The format for the
MAC Address is XX-XX-XX-XX-XX-XX (where X is any
hexadecimal digit). Only the PCs with a MAC address
listed can use the password to browse the built-in
web pages to perform Administrator tasks while all
the others will be blocked.
After clicking the Add button, your PC’s MAC
Address will be placed in the above list.
Click the Save button to store your settings.
Note:
If your PC is blocked but you want to access the
router again, use a pin to press and hold the Reset
Button (hole) on the back panel for about 5 seconds,