User's Manual

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
80
To add a new rule, follow the steps below.
To modify or delete an existing entry:
1.
2.
3.
4.
5.
6.
1.
2.
3.
Click the “Add New…” button. The following
screen will be displayed, as shown in Figure 4-37.
Select a common application from the Common
Applications drop-down list, then the Trigger Port
field and the Incoming Ports field will be automati-
cally filled. If the Common Applications do not have
the application you need, enter the Trigger Port
and the Incoming Ports manually.
Select the protocol used for Trigger Port from the
Trigger Protocol drop-down list, either TCP, UDP,
or All.
Select the protocol used for Incoming Ports from
the Incoming Protocol drop-down list, either TCP
or UDP, or All.
Select Enable in Status field.
Click the Save button to store the new rule.
Click the Modify button next to in the entry you
want to change. If you want to erase this entry,
click on Delete.
Proceed with the changes you want to make.
Click the Save button.
Figure 4-37 Add or Modify a Triggering Entry