User's Manual

Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter
6
Our WiFi Pan and Tilt Camera can be set up in
minutes for instant monitoring and live viewing on
your Windows computer and 3G Smartphone - all
via your wireless network router or switch. For
optional recording capabilities, simply install the IP
Super Client software in your Windows PC and
configure it according to your particular needs.
1. Begin by screwing the bracket to the camera.
Connect the camera using the power adaptor that
comes with the product.
2. Using a standard Ethernet network cable,
connect the camera to your network.
The camera can either be connected to a router/
switch or directly to a PC with an Ethernet network
cable. We recommend setting up the camera on
your network using a wired connection prior to using
the device in a wireless configuration.
Step 1: Connect one end of the network cable to
the RJ45 interface of IP camera.
CAMERA INSTALLATION
INTERNET
Cellular
Phone
IP Camera
Modem
PDAComputer
Intranet
Internet connection