User's Manual

Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter
40
Mode: this value is set according to the frequency
of the fluorescent light. If the frequency does not
match the frequency of the light, markings will be
seen across the screen.
Frame rate: the maximum video frame rate is
25fps. If the network broadband is low, you can
choose a lower frame rate.
Brightness and contrast ratio: use it to adjust the
brightness and contrast ratio of the screen.
Preset position call: when clicked, it will show a
preset position list. The preset position is recalled
when clicking any number from that list.
Preset position setting: first, reset the IP camera
to its fixed position, click call next, and then choose
any available number to store the currently selected
position.

:monitor, this is used to enable the audio stream
from the camera.
:Talk back, this is used to remotely speak and
listen to people by the camera. Live audio can be
recorded as well.
:Click this icon to begin video recording and save
it to your local hard disk or SD card.
:Click this icon to take a snapshot image.
This button provides users a fast way to capture
a single image of the video from the camera.
This button opens the device interface.



