Specifications

TECHNICAL SPECIFICATIONS
- 45.3 kg weight capacity
- Accommodates projectors up to
55.9cm wide x 50.8cm long x 20.3cm tall
- 20.3cm downward travel
- No exposed tracks, gears or scissors
- Draws 3.5 Amps @ 110V and 1.75 Amps @ 220V
at max thrust
- Speed 2.5cm / sec. (only 8 seconds to fully lower)
- Quiet - runs at just 45 dB
- Your choice of RF remote or Control System
Integration Kit (CSI Kit includes IR remote and contact
closure interface)
- Exclusive Nexus 21 Safety Package included
- Steel and aluminum construction
- Power is available in these formats: USA, 110V /
Europe, 230V / Japan, 100V / Australia, 240V /
UK, 230V
WHAT’S IN THE BOX
- Pre-installation bracket (can be provided in advance
to be installed by builder during framing)
- Ready-to-install Eclipse E-500 housing
- Proprietary 3-Axis adjustable universal projector mount
- Removable carrier shroud
- Ceiling interface plate
- Control box with power cord
- Remote control and receiver
(your choice of RF or CSI Kit*)
- Backup control switch
- Installation hardware
- Full assembly instructions with images
ECLIPSE SERIES MODEL E-500
Height:
Width:
Depth:
33cm
73cm without Pre-Installation Bracket
81cm with Pre-Installation Bracket
67.3cm without Pre-Installation Bracket
75.2cm with Pre-Installation Bracket
Your choice of RF remote or Control System Integration
Kit (CSI Kit*). Wired button pad included with both.
CSI Kit*RF
or
Button Pad
*CSI Kit includes IR remote and contact closure interface
CONTROL OPTIONS
Width
Height
Depth
[e-mail] | [phone] | www.NEXUS21.com
INNOVATIVE INSTALLATION & ADJUSTMENT FEATURES
- Pre-installation bracket can be shipped separately in advance, to be installed by builder during framing
- Simple snap-in design allows the housing to be installed to the pre-installation bracket in seconds
- Built-in levelers provide easy adjustments
- 3-Axis adjustable universal projector mount allows for ne-tuning of image position with ease
- Removable shroud provides complete access to the projector for service -- but does NOT need to be removed for
micro-adjustments to image position
- Push-to-release ceiling plate allows complete customization of cover piece to match any ceiling material