Instructions / Assembly

PAINT KIT INSTRUCTIONS
Paint Kit Includes:
• 1 Bottle Base Paint
• 1 Bottle Accent Paint (Smaller bottle)
• 1 Bottle Trim Paint (Ledger, Window/Door Trim)
• 1 Paint Brush
Directions for Use: The Paint Kit should be used to touch up any cut surfaces or
areas on the panel surface where the color coating is scratched or scuffed.
• Shake the bottle thoroughly before using. Identify the rocks or accessory
area(s) that requires the touch up.
• Using the paint, apply an even coat over the area and feather out the
edges to better blend in with the surrounding rock(s). If the rock has a
“faux” finish, paint the entire rock using the same Touch Up color. The
painted rock will blend in with the other non-faux rocks in the panel.
• Use the Accent Color for all other colored rocks.
• Use the Trim Paint for Accessory pieces.
• Clean-up is quick and easy – The paint is water soluble and clean up can
be done with soap and water.
• Brushes can be cleaned with soap and water and can be stored for re-use.
Storage:
Paint Kits should be stored in temperatures ranging from 40 – 90 degrees Fahrenheit
(5-30 degrees Celsius), out of direct sunlight and away from extreme heat. Shelf life is
24 months in this environment.
Note: Paint colors are approximate. If the color does not match exactly, simply paint
the entire rock for uniformity.
Keep out of Reach of Children