Installation Guide

COLUMN WRAP INSTALLS FROM

FLUSH CORNERS

CASTLE ROCK COLUMN WRAP

1st Course

2nd Course

Fir out the column to 13 ¾" X 13¾". Attach starter

strip on each face, stopping 2" from each corner .

Dry fit corners 1,3 and 1,3. Slide down onto the

starter strip and attach all pieces where indicated on

the screw hem. Dry fit corners 2,4 and 2,4. Slide

down and attach as described above. To prevent

pattern repetition use corners 3,1 and 3,1 on the 3rd

the row. Use corners 4,2 and 4,2 for the 4th row.

Repeat from 1,3– 1,3 to desired height

STACKED STONE COLUMN WRAP

Fir out the column to 13 ⅝" X 13⅝". Attach starter strip on each face, stopping 2"

from each corner (Fig 9). Dry fit corners 1,3 and 1,3. Slide down onto the starter strip

and attach all pieces where indicated on the screw hem. Dry fit corners 2,4 and 2,4.

Slide down and attach as described above. To prevent pattern repetition use corners 3,1

and 3,1 on the 3rd the row. Use corners 4,2 and 4,2 for the 4th row. Repeat from 1,3–

1,3 to desired height .

Figure 9

1st Course

2nd Course