Installation Guide

39
ACCESSORIES
1. Sandstone Ledger dimensions are 2 ½" x 4" x 48"
Configure Horizontal Linear Feet.
Total Linear Feet ______ / 4' = number of pieces of Ledger.
 This accessory is used to trim out the top row and can be used with any rock pro-
file. Four (4) Ledgers per box.
2. Sandstone Window/Door Trim dimensions are 2 ¼" x 3 ½" x 48"
Configure Vertical and Horizontal Linear Feet.
Total Linear Feet _____ / 4' = number of pieces of window/door trim.
 Window/Door Trim will be used on all four window sides as well as the top and
sides of door openings and can be used with any rock profile. Four (4) Trim per
box.
3. Sandstone Ledger Outside Corner dimensions are 4 ¼" x 6 ¼" x 2 ½"
Sandstone Ledger Inside Corner dimensions are 9 ¾" x 7 ⅝" x 2 ½"
Ledger Outside and Inside Corners are used to cap corners and show a continuous run
of the Ledger trim piece. Number of pieces depend on number of corners. Two (2)
per box, 1 Left / 1 Right.
4. Metal Starter Strips are in 4' lengths.
Configure Horizontal Linear Feet of area to be covered.
Total Linear Feet _______ / 4' =______ number of pieces of starter strip.
- Used to begin the bottom row, Starter Strips are suggested under each panel in or-
der to avoid face screwing.
5. 12oz. Tubes of Grout _____. One tube of Grout covers approximately 25 linear
feet at a ⅜" bead.
(Depending on project, grout/caulk, may or may not be required).
6. Touch Up Paint Kit _____.
Random Rock Touch up Paint Kits contain Four 120 cc bottles of paint, one for each
panel color and 1 trim color, plus 4 brushes.
All other Touch Up Paint Kits contain One 120cc and 2 60cc bottles of paint, plus 1
brush.
TAKE-OFF SHEET