Manual

07
ABOUT THE RECHARGEABLE BATTERY DEVICE DIAGRAM
08
7. Device Diagram
Caution
Never damage the rechargeable battery--do not remove it from the
ND2901. Consult the chapter on "Battery Disposal". Damaging the
wrapping of the rechargeable battery might cause an explosion or
fire.
Never short circuit the contacts of the rechargeable battery. Never
touch the connections or electrical components inside the ND2901
with metal objects.
Charge the rechargeable battery regularly, even if you do not use
the product. The ND2901 needs some "current" (a small quantity) at
all times. Due to the Li-Poly rechargeable battery technology, it is
not necessary to discharge the battery before recharging. Recharge
the battery completely, about once a month. The device will be
ready for use at any time.
6. About the Rechargeable Battery
A "Li-Poly" (lithium-polymer) rechargeable battery is integrated into the ND2901.
This rechargeable battery does not have the so-called “memory effect”.
As a result, the rechargeable battery can be charged whenever you want.
Furthermore, it has an higher energy content than conventional NiCd and NiMH
rechargeable batteries. Note these important instructions when handling the
Li-Poly rechargeable battery.
The rechargeable battery can be recharged 400 times.
If the battery operation time gets shorter, it may be time to replace the battery.
Consult your authorized NEXTODI dealer to replace the internal battery.
“DC IN” slot for AC power adapter unit (5V/2A).
Recessed Reset key, to be pressed with a tooth pick or similar tool.
Switches off the ND2901 in the event of a hardware or software malfunction.
Connector “BAT” for external rechargeable battery pack (optional)
USB 3.0 Device slot for computer connection.
USB 3.0 Host slot for external USB hard drive (or memory card reader)
connection.
SD/SDXC/SDHC slot
LCD Display
Control key. Controls movement of cursor (up/down/ select) when power is on.
Press the button for more than 2 seconds to switch the ND2901 on or off.
Compact Flash slot.