Manual

35 ADVANCED FUNCTIONS
The firmware file (NEXTOMS.BIN) should be placed in the
root directory of a memory card or the internal hard
drive. Select [In HDD] (hard disk drive) if the firmware
file is to be placed in the root directory of the internal
hard drive.
Select [In Memory Card] if the firmware is in the root
directory of the memory card. If you selected the
memory card, insert the memory card into the ND2901.
If a valid firmware file is not contained in the specified
device, the ND2901 indicates an error. Check whether the
device contains valid firmware in the root directory and
repeat the previous process.
If valid firmware is found at the specified location, the
ND2901 indicates a “FW File Found” message on the LCD.
Confirm the firmware upgrade by pressing the control key
briefly .
The LCD screen indicates that the ND2901 firmware is
being updated. Do not turn the power off during the
firmware upgrade. Use of the AC power adapter is
recommended.
Once the firmware upgrade has completed, the ND2901
will restart automatically.
ADVANCED FUNCTIONS 36
5. Delete TMP folder
Select “TMP Folder” from the main menu.
If the TMP folder exists inside the [NEXTOMS] folder, then
the number of TMP folders will appear on the LCD.
Press the control key briefly to delete the TMP folders.
The LCD screen displays the message “Deleting the TMP
Folders.”
913.0 G
TMP Floders
FW Update
Sel
Back
913.0 G
TMP Folder
Deleting
/
Cancel
913.0 G
TMP FOLDERS
2 Foloders
Delete?
OK
913.0 G
FW UPDATE
No vaild FW File
OK Cancel
913.0 G
FW UPDATE
FW File Found
Update?
913.0 G
FW UPDATE
Updating
Back
913.0 G
FW UPDATE
Completed
Sel
Sel
Back
Back
913.0 G
FW UPDATE
Select Device
Internal HDD
External DEV