Manual

33 ADVANCED FUNCTIONS
2. Auto Copy On/Off
Select “Auto Copy “from the main menu to turn the Auto
Copy on/off by briefly pressing the control key.
The factory default setting is Auto Copy off.
The Auto Copy is now on. If the control key is briefly
pressed, the Auto Copy setting will go to “Auto Copy off.”
If this position is in the “On” state, data “Copy” will be
automatically started 5 seconds after the insertion of
the memory card. Short press the control key to select
changing the status of this option. Default function is
Copy & Verify. (See chapter 12.)
Sel Back
913.0 G
Preview
Self Test
Auto Copy: Off
Buzzer: On
Format
913.0 G
Preview
Self Test
Auto Copy: On
Buzzer: On
Format
Sel Back
NO
913.0 G
21 Files
13.83 GB
Auto Copy? 5
ADVANCED FUNCTIONS 34
3. Buzzer On/Off
913.0 G
TMP Floder
FW Update
Sel
Sel
Back
Back
The Buzzer is on. Select “BUZZER “from the main menu
to turn the buzzer sound on/off by briefly pressing the
control key. The factory default setting is “Buzzer On.”
The Buzzer is now off. If the control key is briefly pressed,
the buzzer setting will go to “Buzzer On.”
Select “FW Update” from the main menu.
Sel Back
913.0 G
Preview
Self Test
Auto Copy: Off
Buzzer: Off
Format
913.0 G
Preview
Self Test
Auto Copy: Off
Buzzer: On
Format
Sel Back
4. Firmware Update
Caution
● It is strongly recommended that the AC adapter be used during this
operation in order to prevent battery failure during the process.