Manual

31 ADVANCED FUNCTIONS ADVANCED FUNCTIONS 32
(2) Full Test
Select “Full Test” from the [Self Test] menu.
The user can choose either an internal hard drive or an
external hard drive, or a memory card.
The Full Test will take several hours. So you need to
connect power to the ND2901. It will read all the sectors
in the internal hard drive to discover if any bad sectors
exist.
The Full Test in progress. This process will take about
2~3 hours.
Cancel
245.0 G
FULL TEST
Take few Hour
Ready?
Connet Power!
Sel
Back
245.0 G
SELF TEST
Select Method
SMART Test
Full Test
30m 27s
Cancel
245.0 G
0 Bad Found
Sel
245.0 G
FULL TEST
Select Device
Internal HDD
External DEV
The user can cancel the Full Test by pressing the control
key for more than 2 seconds.
No errors found.
Error found during the Full Test. Further use of ND2901
may result in the loss of backup data. Consult your
authorized NEXTODI dealer for service.
Caution
● The ND2901 indicates the completion of the test using the buzzer
sound. The power does not turn off automatically at the completion
of the test.
● The ND2901 returns to the initial mode only after the user pushes
the control key for more than 2 seconds.
● It is strongly recommended that the AC adapter be connected for
this test in order to prevent battery failure during the process.
99m 03s
Cancel
245.0 G
0 Bad Found
Full Test OK.
99m 03s Cancel
245.0 G
12 Bad Found
HDD Change
Recommend
Back
245.0 G
0 Bad Found
Cancelled