Manualshelf

User's Manual

ManualsBrandsNextNav ManualsElectronicsThe NextNav Local Beacon will be built, installed and operated by NextNav to provide coverage of the NextNav location service in localized areas such as venues and hot spots
123456789
Document Name: MARS Box User Manual
Version No: 0.2
Company Name: NextNav, LLC.
Confidential Page 7 10/24/2013
Page 7 of 9
documented as needing a POTS line, connect the phone line to the
‘TELCO’ port.
2. Verify that the following LEDs (located at the rear panel) are lit indicating proper
operation:
a) Rubidium: Power Switch LED and status indicator LED are lit
b) MAIA4: Status indicator LED is lit
Figure 2 – MARS Box Rear Panel
3. Connect the field service laptop with an Ethernet cable to the ‘Ethernet’ port on
the MARS beacon box. Wait for a few seconds to get an IP address on the field
service laptop. Try and browse the internet to ensure connectivity. Once
connectivity is ensured, call the operator at the NOC to further commission the
beacon box.