User's Manual

Document Name: MARS Box User Manual
Version No: 0.2
Company Name: NextNav, LLC.
Confidential Page 4 10/24/2013
Page 4 of 9
1 Introduction
1.1 Purpose and Scope
This document describes the commissioning and normal usage procedure for the
NextNav Local beacon box (A4P-200-0013-02).
1.2 Intended Use
The NextNav Local beacon system is intended to be used in restricted access locations (RAL) in
indoor environments. The NextNav Local beacon is a powered by a DC power system approved
for use in telecommunications equipment.
1.3 FCC Compliance Statements
FCC Section 15.21 Information to user.
Any changes or modifications to the equipment operation settings must be approved by the
NextNav, LLC for FCC compliance; otherwise the user's authority to operate the equipment
will be voided.
Section 15.105(b) Class A digital device Information to the user
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of
20cm between the antenna and any body part of the user or nearby persons.