User's Manual

DocumentName:MARSBoxUserManual VersionNo:0.2
CompanyName:NextNav,LLC.

Confidential Page7 5/24/2013 Page7of9


documentedasneedingaPOTSline,connectthephonelinetothe
‘TELCO’port.
2. VerifythatthefollowingLEDs(locatedattherearpanel)arelitindicatingproper
operation:
a) Rubidium:PowerSwitchLEDandstatusindicatorLEDarelit
b) MAIA4:StatusindicatorLEDislit


Figure2–MARSBoxRearPanel
3. ConnectthefieldservicelaptopwithanEthernetcabletothe‘Ethernet’porton
theMARSbeaconbox.WaitforafewsecondstogetanIPaddressonthefield
servicelaptop.Tryandbrowsetheinternettoensureconnectivity.Once
connectivityisensured,calltheoperatorattheNOCtofurthercommissionthe
beaconbox.

