User's Manual

Document Name: MBS Leopard Transmitter Usert NOC Operating Manual
Version No: 1.5
Company Name: NextNav, LLC.
Confidential Page 8 9/17/2014
Page 8 of 13
antenna to the EvDO DIV port. In cases of sites which have been
documented as needing a POTS line, connect the phone line to the
‘TELCO’ port.
2. Verify that the following LEDs (located at the front panel) are lit indicating
proper operation:
a) Primary unit: Status indicator LED is lit in RED
3. Connect the field service laptop with an Ethernet cable to the ‘Ethernet’ port on
the MARS beacon box. Wait for a few seconds to get an IP address on the field
service laptop. Try and browse the internet to ensure connectivity. Once
connectivity is ensured, call the operator at the NOC to further commission the
beacon box.
2.3 Power-up Sequence
Connect AC Lince Feed to terminal block labled Incoming AC.
Figure 2 AC Mains Connect