User's Manual

* Please see more info about the iGo adapter in the FAQ on: www.bluespoon.info
.
NOTE: For cell phones using Hands-Free profile:
Some of the cell phones that use the Bluetooth® Hands-Free profile might need to ‘connect’ to the Bluespoon™ SPIDER even after
pairing in order to work properly. This can be done in two ways. Either connect to the cell phone by pressing the joystick on the
Bluespoon™ SPIDER, or connect to the Bluespoon™ SPIDER using the cell phone’s menu. Remember also to set the Bluespoon™
SPIDER as “authorised” in the cell phone’s Bluetooth® menu. (refer to the cell phone’s manual in order to do so).
Pairing with more than one device:
The Bluespoon™ SPIDER is capable of pairing with up to 7 devices however, It cannot takes simultaneously pairing with more than one
device at the time.
Establish connection:
With many devices, especially those which are Bluetooth® enabled, there is no need to perform additional operations to establish a
connection once paired. e.g. typically, a cell phone will automatically connect to the headset when a call is initiated.
1. Push forward
2. Push backward
3. Push upward
4. Push downward
5. Press
FIG.3
Use with cell phone:
The following functions are based on the Bluespoon™ SPIDER headset when paired to a Bluetooth® enabled cell phone
Receiving an incoming call
Music is playing and you have an incoming call. The incoming call indicator sound will be heard
Press the joystick once, the music will be paused and you will be able to answer the call.
Hang up the ongoing call
You have an ongoing call in the Bluespoon™ Spider.
Press the joystick once, the call will be disconnected and the music will be resumed.
Increase the volume on your headset
You have an active call or music is being streamed in the Bluespoon™ Spider.
Push the Joystick to the VOLUME UP position once to increase the volume one step at a time. Repeat this until desired volume is
reached.
Decrease the volume on your headset
You have an active call or music is being streamed in the Bluespoon™ Spider.
Push the joystick to the VOLUME DOWN position once to decrease the volume one step at a time. Repeat this until desired volume is
reached.
Audio transferring from your Bluespoon™ SPIDER to your cell phone
(HANDS-FREE profile only)
You have an ongoing call in the Bluespoon™ SPIDER and want to transfer the call to the cell phone.
Push the joystick to the BACKWARD position once in order to transfer the call to the cell phone. The music will be resumed in the
Bluespoon™ SPIDER when the call is disconnected from the cell phone.
Audio transferring from your cell phone to your Bluespoon™ SPIDER*
(HANDS-FREE profile only)
You have an ongoing call in the cell phone and want to transfer the call to the Bluespoon™ SPIDER.
Push the joystick to the BACKWARD position once in order to transfer the call to the Bluespoon™ SPIDER. *Please note: This feature
is only available when the Bluespoon™ SPIDER is not connected with A2DP profile. You can also transfer the call from the cell phone
to the Bluespoon ™ SPIDER, using your cell phone. To do so please refer to user guide of the cell phone.
Dial last number from the Bluespoon™ SPIDER
(HANDS-FREE profile only)
You want to call the last dialled number from the Bluespoon™ SPIDER.
Push down the joystick to the VOLUME DOWN position for 2 sec. If music is being streamed, it will pause.
Reject a call
(HANDS-FREE profile only)
You have an incoming call, the “incoming call indicator sound” is heard and you want to reject the call.
Press and hold the joystick for 2 sec. and the call will be rejected. The cell phone will send a “busy signal” to the caller.
Voice dial* (HANDS-FREE profile only)
You want to use Voice dial from your Bluespoon™ SPIDER.